Aluminium Italy Filter Foundry uses foam and high-purity ceramics as raw materials to effectively remove the non-metallic solid mixture of molten aluminum and aluminum alloy flux in the aluminum casting industry.

The ceramic foam filter Al2O3 is designed for cast metal. Because of the formation of a “filter cake” on the side of the inlet filter, and because of the deep filtration inside the ceramic matrix.

Alumina ceramic foam filters are mainly used in the purification process of producing aluminum and aluminum alloys. With the increasing requirements for the quality of aluminum products, the application of alumina ceramic foam filters will become more and more extensive.

Aluminium Italy Filter Foundry

Ceramic foam filter Dimention
660x660x50(26″)
584x584x50(23″)
508x508x50(20″)
432x432x50(17″)
381x381x50(15″)
305x305x50(12″)
228x228x50(9″)
178x178x50(7″)

Ceramic foam fitler Pore Size (PPI): 10/20/30/40/50/60

The Al2O3 function of Aluminium Italy Filter Foundry is limited by the open 3D structure of the ceramic matrix created by the interconnected unit system. They have good thermal conductivity, stability and resistance to sudden temperature changes.

The advantages of Adtech’s ceramic foam filter production of aluminum castings:
Uniform pore size, high porosity, correct sintering, high bending and compressive strength, and effective filtration.

Aluminium Italy purchased Filter Foundry through sales@adtechamm.com, used for continuous casting, semi-continuous casting, gravity casting and low pressure casting aluminum flux filter equipment.
The technologists of Aluminium Italy believe that the Filter Foundry is an effective tool to achieve the metallurgical purity of molten metal during the casting process. The filter also stabilizes the filling of the mold, thereby preventing undesirable defects in the casting.

Leave a Reply

邮箱地址不会被公开。 必填项已用*标注