Foam Filter Manufacturers Australia is made of non-stick aluminum material and the product is white or milky white. It is suitable for the purification process of producing high-quality and demanding aluminum and aluminum alloy.

Through physical adsorption and chemical action, it can effectively remove various oxidized inclusions generated in the aluminum smelting process, thereby reducing casting defects and improving casting quality.

Foam Filter Manufacturers Australia should be preheated before using CFF, the filter plate should be completely sealed in the aluminum water filter box to ensure that all aluminum water passes through the filter plate, and the total amount of filtration must not exceed the specified limit. If it is high, it should be adjusted by multi-stage filtering or reducing throughput.

The performance characterization results show that the foam added with the modifier has a porosity of more than 90% and a compressive strength of up to 2mpa, and the shape stability of the material is considered.

Adding about 8% bentonite to the basic components can make the modification effect of the aluminum factory filter reach the best state.

The results show that the higher the crystallinity of the foam ceramic-based material, the higher the room temperature strength of the material.

The aluminum factory filter is made of high-quality high-purity zirconia as raw material, with a unique formula and advanced environmental protection technology.

Foam Filter Manufacturers Australia

The three-dimensional network has a uniform structure, high strength, stable texture, no slag, high temperature resistance and strong thermal shock resistance.

Foam Filter Manufacturers Australia is suitable for purification and filtration of high temperature aluminum and aluminum alloy solutions. It can filter non-metallic slag and micron-level slag, making the surface of castings smoother.

In order to reduce the processing loss, the filter can make the aluminum liquid fill the cavity more uniformly, and the metal liquid has a higher tendency to turbulence during pouring.

After the three-dimensional pore structure, the turbulent flow is finally transformed into a very stable laminar flow, which better fills the cavity.

The impact corrosion of the metal solution to the casting cavity is reduced, the scrap rate is significantly reduced, the production cost is reduced, and the labor productivity is improved.

When the aluminum and aluminum alloys are dissolved, the front tank of the filter tank of the aluminum factory filter tank forms a smooth filter tank cavity.

The filter front box products provided by have excellent heat resistance, aluminum resistance, solution corrosion resistance, good thermal insulation performance, high strength, strong mechanical impact resistance, and molding size standards. The filter plate provides reliable support for filtration efficiency.

In addition to general specifications, it can be customized according to customer needs.

Leave a Reply

邮箱地址不会被公开。 必填项已用*标注