Ceramic Foam Filters manufacture

Ceramic Foam Filters manufacture AdTech are mainly applied for filtration of aluminum and aluminum alloys in foundries and cast houses. With their excellent resistance to attack and corrosion from molten aluminum, they can effectively remove inclusions, reduce trapped gas and provide laminar flow, and then the filtered metal is significantly cleaner. Cleaner metal results in higher-quality castings, less scrap, and fewer inclusion defects, all of which contribute to bottom-line profit.

Alumina ceramic foam filter can be made by specific procedures and have peculiar bone-frame holes just like the shape of foam(Called three-dimensional connected channel) and myriad eyelets which only been found in big times microscope.

Compare to similar ones, our products have many advantages as below:

1. Stable chemical composition
2. Excellent strength
3. Resistant to high temperature
4. Calm down of the turbulent flow of metal nicely
5. big m2/m3
6. Superior dimensional tolerances: +0/-2.5

Standard size: (we can also customize the size according to your requirement)

1. 178x178x50 mm or 7” x7”x2” (10–60ppi)
2. 229x229x50 mm or 9” x9” x2” (10–60ppi)
3. 305x305x50 mm or 12” x12” x2” (10–60ppi)
4. 381x381x50 mm or 15” x15” x2” (10–60ppi)
5. 432x432x50 mm or 17” x17” x2” (10–60ppi)
6. 508x508x50 mm or 20” x20” x2” (10–60ppi)
7. 584x584x50 mm or 23” x23” x2” (10–60ppi)

Leave a Reply

邮箱地址不会被公开。 必填项已用*标注