6061 Aluminum Smelting process includes melting, purification, impurity removal, degassing, slag removal and casting processes.

The main process of 6061 Aluminum Smelting
(1) Ingredients
In the batching process, according to the specific alloy grades to be produced, the added amount of various alloy components is accurately calculated, and then various raw materials need to be reasonably matched.
(2) Smelting
In the process of smelting, it is necessary to pay attention to adding the prepared raw materials into the smelting furnace according to the process requirements to melt, and to effectively remove the miscellaneous slag and gas in the melt through degassing and slagging refining methods.
(3) Casting
The molten aluminum is cooled and casted into various specifications of aluminum rods through a deep well casting system under certain casting process conditions.

The 6061 aluminum rod alloy has good properties and is widely used. The 6061 aluminum rod has excellent processing properties, excellent welding characteristics and electroplating, good corrosion resistance, high toughness and no deformation after processing, dense material without defects, and easy to polish and top The color film is easy, and the oxidation effect is excellent. The material and use are explained in detail below.

The main alloying elements of 6061 aluminum rod are magnesium and silicon, and form Mg2Si phase. If it contains a certain amount of manganese and chromium, it can neutralize the bad effects of iron; sometimes a small amount of copper or zinc is added to increase the strength of the alloy without significantly reducing its corrosion resistance; there is a small amount of conductive materials To offset the adverse effects of titanium and iron on electrical conductivity; zirconium or titanium can refine the grain and control the recrystallized structure; in order to improve the machinability, lead and bismuth can be added.

6061 Aluminum Smelting

Introduction to the use of 6061 aluminum rod alloy
1. The application of strips is widely used in decoration, packaging, construction, transportation, electronics, aviation, aerospace, weapons and other industries.

2. Aerospace aluminum materials are used to make aircraft skins, fuselage frames, girders, rotors, propellers, fuel tanks, wall panels and landing gear pillars, as well as rocket forging rings, spacecraft wall panels, etc.

3. Aluminum materials for transportation are used in the body structure materials of automobiles, subway vehicles, railway passenger cars, high-speed passenger cars, doors and windows, shelves, automobile engine parts, air conditioners, radiators, body panels, hubs and materials for ships.

4. Aluminum materials for packaging All aluminum cans are mainly used as metal packaging materials in the form of thin plates and foils to make cans, lids, bottles, barrels, and packaging foils. Widely used in beverages, food, cosmetics, medicines, and cigarettes , Industrial products and other packaging.

Five, printing aluminum is mainly used to make PS plates, and aluminum-based PS plates are a new type of material in the printing industry for automated plate making and printing.

6061 Aluminum Smelting needs to use ceramic foam filter, degassing unit, filtering unit, Launder and other products in the melting, purification, impurity removal, gas removal, slag removal and casting process. These products are produced by AdTech Metallurgical Materials Co., Ltd. To provide, please contact sales@adtechamm.com

, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Leave a Reply

邮箱地址不会被公开。 必填项已用*标注