Melting Loss Alumina Ceramic Foam Filter has the characteristics of corrosion resistance, high temperature resistance, high mechanical strength, no elution of harmful substances, and no secondary pollution.

Under the action of fluid pressure, the micropores will not deform, easy to clean and regenerate, and have a long service life. Widely used in metallurgical environmental protection enterprises.

Melting Loss Alumina Ceramic Foam Filter adopts a new process of precipitation + microporous ceramic filter, novel design, simple structure, economical and practical, and the removal rate of suspended solids reaches more than 97%.

The removal rate of COD exceeds 95%, and the concentration of suspended solids in wastewater is generally about 10-50mg, which meets the first-level discharge standard.

Adtech specializes in Casting Filter in Australia. Its leading products include: high temperature resistant filter materials, etc., which are used in the aluminum processing industry, such as rods, automobile wheels, and automobile parts processing.

After long-term development and innovation, the company has formed a series of products such as aluminum filter plates, filter caps, heat preservation caps, and aluminum runners. Praised by the aluminum processing industry.

The company has strong technical force and perfect quality assurance system. This is a company that can give users complete peace of mind.

Melting Loss Alumina Ceramic Foam Filter

We will serve our users based on honesty.

Working temperature≤1200°C
Porosity 80~90%
Compressive strength (room temperature) ≥1.0 MPa
Bulk density≤0.5g/cm3
Thermal shock resistance 800°C

5 times at room temperature for malleable cast aluminum, aluminum alloy and non-ferrous metals, flue gas absorbents, sound-absorbing materials, catalyst carriers and environmentally friendly filter materials, special fillers, etc.

The eight elements that affect the properties of aluminum alloys are: vanadium, calcium, lead, tin, bismuth, antimony, beryllium and sodium and other metal elements. Due to the different uses of the aluminum coils, the impurity elements added during the processing are these impurity elements. Due to different melting points and different structures, the compounds formed by aluminum are also different, so the effects on the properties of aluminum alloys are also different.

Alumina Ceramic Foam Filter Dimension
660x660x50(26 inch)
584x584x50(23 inch)
508x508x50(20 inch)
432x432x50(17 inch)
381x381x50(15 inch)
305x305x50(12 inch)
228x228x50(9 inch)
178x178x50(7 inch)

Alumina Ceramic Foam Filterr Pore Size (PPI): 10/20/30/40/50/60

Leave a Reply

邮箱地址不会被公开。 必填项已用*标注