Ceramic Foam Filters for casting

Ceramic Foam Filters for casting are a new type of filter with low density, high porosity, and a three-dimensional network framework structure. It is widely used in the aluminum processing industry to filter molten aluminum, thereby improving the quality of the aluminum.

 

Ceramic Foam Filters for casting Function:

The alumina ceramic foam filter can effectively remove non-metallic solid mixtures in aluminum and aluminum alloy melts, reduce trapped gas, and provide laminar flow to make the filtered aluminum and aluminum alloy cleaner.
Clean metal can enhance the quality of castings, reduce scrap, minimize inclusion defects, improve the quality of aluminum alloy and other non-ferrous alloy castings, and lower the cost of casting. Its maximum use temperature is 1200°C.

Alumina Foam Ceramic Filter advantages:

Alumina ceramic foam filter has the advantages of high porosity, high mechanical strength, stable chemical performance, strong corrosion resistance, high adsorption rate, good filtering function, and good thermal shock resistance.

Ceramic foam filter application areas:

It is mainly used in the purification process for the production of non-ferrous alloys such as aluminum and aluminum alloys. It can also be used as a gas-solid, liquid-solid separation medium, a catalyst carrier, a burner, for sound absorption, and environmental protection.
A gasket is installed on the edge of the alumina ceramic foam filter; the gasket ensures the correct and tight position of the filter in the filter box.
There are different types of gaskets, such as ceramic fiber gaskets, etc., and alumina ceramic foam filters without gaskets can also be provided.
These types of filters have been favored by customers from Europe, the Middle East, and the United States for many years.

Ceramic Filter For Aluminium

 

 

Product Features of Ceramic Foam Filters for casting:

1 High strength, no loose ceramic particles or powder
2 Three-dimensional connected mesh structure with high porosity.
3 The surface area of ​​slag collection is large, and the internal surface area of ​​filtering is large.
4 Excellent thermal shock resistance.

Adtech offers filters in a variety of sizes, shapes, and pore sizes

The top of the ceramic foam filter captures large pore particles.
The larger particles trap smaller particles in the filter cake.
The finer particles are trapped in the pores of the filter.

3 Responses to Ceramic Foam Filters For casting
  1. […] the market demands higher and higher quality ceramic foam filters, to adapt to the market requirements, Adtech pays close attention to production process management […]

  2. […] the 1970s, the United States developed a sponge-like ceramic foam filter for aluminum made of alumina, chromium oxide, and other materials. The main component of typical foam ceramic […]

  3. […] transmittance is an effective non-destructive testing method for aluminum cast ceramic foam filter products and filter area, and it is also another important indicator […]


[top]

Leave a Reply

Your email address will not be published. Required fields are marked *