Alcoa Aluminio Metal Foam Filter can effectively remove various impurities in molten aluminum. Sealing ceramic fiber gaskets are attached around the filter plate to help seal the filter plate in the filter box and ensure that there is no molten aluminum on the side.
Ceramic foam filter-light transmittance detection
Take the AdTech ceramic foam filter, compare it with a flashlight, and observe the uniformity of light transmission on the other side of the filter. No blind spots are found, and check whether the light transmittance meets the requirements for use.
Ceramic foam filter
Use compressed air to purge the slag on the surface of the ceramic foam filter.
Alcoa Aluminio Metal Foam Filter installation
Gently put the AdTech ceramic foam filter into the filter box, and then press the sealing gasket around the AdTech ceramic foam filter by hand. The surrounding environment is tight without gaps and sealed with refractory mud.
Function of ceramic foam filter
Purify molten metal liquid
Simplify the gating system
Improve the metallurgical structure of castings
Reduce casting unevenness
Improve casting quality rate
Reduce internal reoxidation defects in castings
Reduce surface defects after casting