seo

Zirconia Foam Filters perform the following functions Purification of molten metal from metal and non-metal components; Reducing the amount of oxides during the formation of a turbulent flow; Increasing the fluidity of the metal; Elimination of inclusions and metal defects; Improving casting quality due to improved mechanical properties; Reducing the formation of scrap and the […]

Ceramic Zro2 Foam Filter Today, the most promising direction in the field of industrial use of reticulated polyurethane foam is the production of Ceramic Zro2 Foam Filter. Using these filters, various impurities in metal castings are eliminated due to their open-porous structure. During casting, molten metal flows through the pores of the filter, thereby leaving […]

Ceramic Filter Supplier Ceramic  Filter application temperature – up to 1700 ° C (with short-term use, higher temperatures are also possible). To ensure optimal filter efficiency, they must be preheated. Three types of ceramic foam filters are offered, which are made on the basis of: aluminum oxide (for filtering aluminum at temperatures up to 1150 […]

15 Inch Ceramic Filter Ceramic foam filters for cleaning metal melts from non-metallic inclusions and oxide films Ceramic foam filters are used in the metallurgical industry and foundry to clean metal melt from non-metallic inclusions and oxide films, which helps to eliminate many shortcomings, improve the quality of the metal, reduce the amount of scrap […]

Molten Metal Foam Filter Smelting aluminum alloys presents a number of difficulties. The low density of aluminum alloys contributes to the formation of gas shells and porosity, since gases easily penetrate into the metal medium and saturate it. Aluminum is easily oxidized. It is difficult to clear the melt of slag and oxides. Slag and […]

Zro2 Porous Ceramic Filter Filtration of melts has now become an integral part of the technological process of melting and casting aluminum alloys at all enterprises. Apply mesh, granular and porous ceramic filters. Strainers are made of fiberglass or metal mesh with mesh sizes from 0.5 × 0.5 mm to 1.5 × 1.5 mm. Zro2 […]

Types of filters for various metals 1. Filters for steel If metal is necessary for filtering – this is steel, then filters made on the basis of zirconium oxide are perfect for this purpose. They can be used at a temperature of 1700 degrees Celsius, however, if the application is not long, then it is […]

Alumina Foundry Filter The incorporation of extraneous elements (particles) into the metal can sometimes lead to the unsuitability of the entire batch of products made and this type of metal, which in turn leads to complete rejection. Until recently, such a problem was considered practically unsolvable, and it would seem impossible to solve the issue […]

Zirconia Cff When use Zirconia Cff, inclusions are captured on a filter installed in the metal flow path. Simple filters are fiberglass or steel mesh. They capture oxide films, but not small inclusions. A more efficient filtration is ensured by using ceramic foam filters (PCF), which are a spongy ceramic structure in which molten metal […]

Alumina Foundry Foam Filters Alumina Foundry Foam Filters with a coating for filtering aluminum, silumins, TsAM and other aluminum alloys from slag impurities, oxides, oxide films and gases at a liquid melt temperature up to 900 ° C .. SHORT DESCRIPTION Alumina Foundry Foam Filters are made from aluminum-borosilicate glass of type “E” with different […]