Aluminium 7075 Ceramic Filter Malaysia is currently the most widely used aluminum melt filter filter, widely used in various large and small aluminum casting plants in Southeast Asia.

Melt Aluminum Ceramic foam filter Dimension
660x660x50(26 inch)
584x584x50(23 inch)
508x508x50(20 inch)
432x432x50(17 inch)
381x381x50(15 inch)
305x305x50(12 inch)
228x228x50(9 inch)
178x178x50(7 inch)

Aluminium 7075 Ceramic Filter Malaysia

Ceramic foam filter Pore Size (PPI): 10/20/30/40/50/60

30ppi 40ppi Foundry Filter is the most commonly used ceramic foam filter in the aluminum casting industry.
Ordinary aluminum casting usually uses 10-40ppi ceramic filter plates.
Aviation and high-quality aluminum materials usually use 30-60ppi ceramic filter plates.

When the molten metal flows through the ceramic body with complex structure, it is divided into many small streams, which increases the contact area and contact probability of the inclusions in the molten metal and the filter medium.
Because the surface of the filter is a very small uneven surface, it has electrostatic adsorption and cat-attachment effects on inclusions.

Aluminium 7075 type
Common types of aluminum plates and aluminum alloys are: aluminum strip, aluminum foil, aluminum plate, aluminum tube, mirror aluminum plate, alloy aluminum plate, curtain wall aluminum plate, pattern aluminum plate, embossed aluminum plate, aluminum rod, non-slip aluminum plate, aluminum plate, cold rolled aluminum plate, hot rolled aluminum plate , Southwest Plate (imported) mirror aluminum plate, pure aluminum plate, pure aluminum coil, deep-drawn aluminum plate, lighting aluminum plate, bottle cap material, circuit board, transformer special aluminum strip, aluminum foil, composite bottom plate, rust-proof aluminum plate, etc.

Features of Aluminium 7075
7075 is an aluminum alloy with zinc as the main alloying element, but sometimes a small amount of magnesium and copper are added. Among them, super-hard aluminum alloys contain zinc, lead, magnesium and copper alloys, which are close to the hardness of steel, can be heat-treated and strengthened, are high-strength, heat-treatable alloys, have ordinary corrosion resistance and good mechanical properties. Aluminum 7075 is a cold-treated forging alloy with high strength, far better than mild steel. 7075 aluminum alloy is one of the most powerful alloys commercially available. General corrosion resistance, good mechanical properties and anode reaction. The small grains make the deep drilling performance better, the tool wear resistance is enhanced, and the thread rolling is more different.

Malaysia Aluminium is introducing Aluminium 7075 Ceramic Filter Malaysia to local aluminum melting and casting plants and sending to those in need.

Leave a Reply

邮箱地址不会被公开。 必填项已用*标注