Tag Archives: ceramic foam filter

Ceramic Foam Filters for casting Ceramic Foam Filters for casting are a new type of filter with low density, high porosity, and a three-dimensional network framework structure. It is widely used in the aluminum processing industry to filter molten aluminum, thereby improving the quality of the aluminum.   Ceramic Foam Filters for casting Function: The […]

Standard use and recycling of ceramic foam filters Standardized use of ceramic foam filters in melting and casting workshops. Aluminum alloy smelting uses solvent refining treatment in the furnace and aluminum ceramic foam filters outside the furnace to remove non-metallic slag inclusions in aluminum alloy melts, which has long been an important means of purifying aluminum liquid. […]

Improved ceramic foam filter quality As the market demands higher and higher quality ceramic foam filters, to adapt to the market requirements, Adtech pays close attention to production process management in terms of product quality improvement and improved ceramic foam filter quality so that improves the market competitiveness of our products. The company invested to purchase the interior […]

With the increasing demand from domestic and foreign customers for our company’s ceramic filter plate products, the current cutting accuracy of the filter board foam body cannot meet customer needs (the original cutting diameter accuracy of the porous ceramic filter was+1mm, -2mm, and the current accuracy has been increased to ± 1mm). To improve product quality, […]

1. Background The briquetting is used in the casting and rolling production line. When in use, the briquetting is placed on top of the porous ceramic filter to prevent the alumina ceramic foam filter from floating during the casting and rolling process. The general service life is 3-6 months; the product needs to have sufficient density and […]

Recently, the quality inspection and the quality department have frequently responded to the ceramic foam filter sprayed dead hole. The quality department has several assessment items for the workshop, and the production internally finds the cause and analyzes the root of the problem. ceramic foam filter sprayed dead hole–Problems in the spraying process: Spray A on […]

The inclusions in the aluminum melt mainly include solid inclusions and gas inclusions. The solid inclusions are mainly Al2O3, AlN, Al3C4, and MgO produced by the reaction of aluminum and its alloys in the smelting process with N2, O2, and CO2 in the furnace gas. Finally oxidized to Al2O3, MgAl2O4; The methods for removing inclusions […]

Porous ceramic filter is a porous medium with a three-dimensional through-network structure. It has good chemical stability, high specific strength, high-temperature resistance, thermal shock resistance, and a large specific surface area. It is widely used in the filtration and purification of high-temperature melts in the metallurgical industry. Its filtration The purification mechanism is mainly manifested […]

Features of Zirconia “ceramic foam filter“. 1. The zirconia porous ceramic filter uses a three-dimensional network structure and an organic foam body connected to pores as a carrier; 2. The zirconia ceramic foam filter invades the special ZrO2 molten material with thixotropy; 3. The zirconia ceramic foam plate adopts the automatic extrusion process of square […]