AdTech Ceramic Foam Filter

Packaging quality

Each filter plate is packaged in a single cardboard box and is packed in 5 boxes.

 Size

20-inch 40PPi filter plate, size 508mmx508mmx50mm.

Slag

Remove AdTech Ceramic Foam Filter, there is a very small amount of white powder in the cardboard.

Sealed edge detection

The asbestos sealing edge around the AdTech Ceramic Foam Filter is of good quality and meets the requirements for use.

Light transmittance detection

Pick up the Ceramic Foam Filter, compare it with the flashlight, and observe the uniformity of light transmission from the other side of the filter. No light transmission dead zone is found, and the light transmittance is checked to meet the requirements for use.

Purge

Purge the slag on the surface of the AdTech Ceramic Foam Filter with compressed air.

AdTech Ceramic Foam Filter

Installation

Gently put the Ceramic Foam Filter into the filter box, and press the sealing gasket around the Ceramic Foam Filter by hand. The surrounding is compacted without gaps and sealed with refractory mud.

 

 

3 Responses to AdTech Ceramic Foam Filter
  1. […] Casting Using Ceramic Foam Filter is increasingly being used in aluminum industry these days. These are special filters made using […]

  2. […] Ceramic foam filter is able to remove oxides from the surface of aluminum and thus increase casting quality. More and more aluminum sheets and foil manufacturers are today using these filters. […]

  3. […] Foam Filter Thailand Function & Advantages AdTech Ceramic Foam Filters offer the best way to eliminate non-metallic inclusions, foreign materials that are a major source […]


[top]

Leave a Reply

邮箱地址不会被公开。 必填项已用*标注