seo

Kazakhstan Electrolysis Plant JSC (KEZ) Kazakhstan Electrolysis Plant JSC (KEZ), part of ENRC (Eurasian Natural Resources Corporation), is the only primary aluminum plant in Kazakhstan. The plant is located in Pavlodar. Opened in 2007. It includes an electrolysis workshop, a foundry, anode manufacturing workshop and other auxiliary departments. A metallurgical cluster with a full production […]

Alumina Foam Ceramic Filter Plate for cleaning the molten aluminium Alumina Foam Ceramic Filter Plate is used in the Aluminium metallurgical industry and foundry to clean metal melt from non-metallic inclusions and oxide films, which helps to eliminate many shortcomings, improve the quality of the metal, reduce the amount of scrap during casting and also […]

The Possibility Of Removing Non-Metal Inclusions From The Aluminium With The Ceramic Filters The presence of non-metallic impurities that enter the melt during the entire process of melting and casting of liquid metal adversely affects the quality of the smelted metal. This is known to steelmakers, and casters, and metalworkers. Ceramic Filters can keep the aluminium purity. […]

Ceramic foam filters used in aluminium casting Ceramic foam filters are designed to ensure high purity of blank casting of aluminum alloys at metallurgical plants and for filtering aluminum castings in foundries. Filters have a three-dimensional structure of interconnected pores forming a labyrinth of the ceramic filter body. Filters are distinguished by a homogeneous ceramic […]

The use of ceramic foam filters in the foundry allows us to solve two important problems in the first place: to clean the casting metal from non-metallic inclusions and to ensure the laminar metal flow in the gate-feeding system. The high filtering properties of the filters are determined by the open 3D structure of the […]

Filtering aluminum-based alloys in foundry Alloys of aluminum and other light alloys are particularly prone to the formation of unwanted inclusions. A high magnesium content leads to the formation of oxide inclusions that adversely affect the quality of the metal. The resulting slag inclusions, exfoliating particles of the furnace lining and the drain trough, along […]

Metallurgical and foundry filters for aluminum refining PURPOSE: Filter elements for aluminum PEA are designed for fine filtering of all grades of aluminum and its alloys (wrought and cast alloys based on aluminum – silicon (silumins), aluminum – copper (duralumin), aluminum – magnesium (magnalium), special silumin) zinc , magnesium and other non-ferrous metals and alloys, […]

Reference parameter on the use of foam filters. Necessary properties. Obviously, the filter should effectively remove particles of inclusions, but not provide excessive resistance to metal flow. To work successfully, the filter must also withstand the thermal and mechanical stresses that occur during casting. The filter should not correlate due to metal-slag-filter interactions and should […]

Filtration of molten metal using ceramic filters Non-metallic inclusions in casting cause both cosmetic and functional problems, which can lead to expensive defect correction or complete rejection. Until recently, removing inclusions was almost impossible. Today, there are filters on the market that have shown their ability to effectively remove non-metallic inclusions from both iron-based alloys […]

Novelis Ceramics Foam filter used in aluminium casting Novelis Ceramics Foam filter mainly used for filtering aluminum and aluminum alloys in foundries and cast houses. Due to their excellent heat resistance and corrosion resistance of molten aluminum, they can effectively eliminate inclusions, reduce the clamped gas and provide a laminar flow, and then the filtered […]