seo

MALAYSIAN ALUMINIUM & ALLOYS SDN BHD (MAA) MAA was founded by Datuk Muthukumar Ayarpadde, who is also the company’s executive chairman. MAA consists of experienced and well-trained employees. The smelter began operations in 2004 with an annual production capacity of 12,000 tons. TRF (Tilt Rotary Furnace) using Australian and French technology is installed. Annual production […]

40 ppi Cff manufacturer: Defect analysis and solutions for casting aluminum alloy ingots In the production process of cast aluminum alloy ingots, if improper control occurs, various product defects often occur, especially aluminum-silicon alloys such as ADC12 and A356. Segregation of chemical components in ingots The phenomenon of uneven distribution of chemical components in ingots […]

Filter Zirconia is used for aluminum alloy melt filtration and purification Inclusions and gases in the metal have a significant impact on the material’s strength, fatigue resistance, corrosion resistance, stress corrosion cracking performance, etc. Effectively controlling the oxidized inclusions in the melt to improve the quality of cast rods and rolled plates has become a […]

Molten Aluminium Cff and aluminum ingot production What is aluminum ingot? Aluminum, the raw material in our daily industry is called aluminum ingot, which should be called “aluminum ingot for remelting” according to Chinese standard (GB/T1196-93), but everyone is used to “aluminum ingot”. It is produced by electrolytic method using alumina-cryolite. After aluminum ingots enter […]

Molten Aluminum Cff is the most effective and reliable means to remove non-metallic inclusions in aluminum melt, and is the most effective filtering method. The deep bed filter is large in size, it takes time and effort to install and replace the filter medium, and it is only suitable for the production of large quantities […]

Ceramic Foundry Filters Manufacturers Adtech said that the quality of the aluminum melt is very important, it greatly affects the subsequent processing performance and the quality of the final product. Therefore, all countries in the world very much wish to purify aluminum melt. There are many reasons for aluminum pollution. On the one hand, in […]

Ceramic Filter can remove the inclusions in the aluminum metal liquid, and rectify, turbulent metal liquid, improve the quality of castings and improve the surface defects of castings. It is a special ceramic product with a three-dimensional three-dimensional network structure sintered at high temperature by using polyurethane foam as a precursor, dipping and refractory slurry […]

Aluminium Cff is a porous ceramic with a high porosity (80% to 90%) with a three-dimensional space grid structure. Due to its advantages of low density, high strength, high temperature resistance, corrosion resistance and good filter adsorption. In recent years, through the development of the third generation Aluminium Cff (CFF, namely Ceramic Foam Filter), the […]

Ceramic Foam Filter Aluminium is used to filter aluminum slag into aluminum melt to improve the purity of the melt. 1. It can effectively eliminate large inclusions in the aluminum liquid. 2. It can remove the fine inclusions of a few microns in size in the aluminum melt that conventional processes cannot do. At the […]

Ceramic foam filter UAE is used for smelting and recycling of aluminum scrap When cutting metal castings, chips account for about 20% of the weight of the casting, up to about 30%. The aluminum shavings in the process of recycling products can reduce production costs and have good economic benefits. The purpose of waste aluminum […]