19Mar 2021
Ceramic Foam Filter Seller

Ceramic Foam Filter Seller focuses on the research and development, production and sales of high-absorption ceramic foam filter plates (CFF) used in aluminum alloy casting. The foam ceramic filter plate uses a three-dimensional network structure and an organic foam with connected pores as a carrier to invade the thixotropic special quality molten material slurry. The […]

02Mar 2021
Rotary Degassing Equipment

Rotary Degassing Equipment is carried out between the casting (or metal holding) furnace and the casting machine. Such a metallurgical launder can have a slight inclination from the casting furnace to the casting machine, and is suitable for the flow of molten metal from the casting furnace to the casting machine. Impurities in molten aluminum […]

02Mar 2021
Online Degasser

Online Degasser achieves stable operation by changing the power transmission mode of the rotor, so that the rotor can run at high speed, thereby removing the H. in the molten aluminum. Currently, it is usually 300 to 450 rpm, and the maximum is 600 rpm. After changing to the bottom gearbox, the length of the […]

02Mar 2021
Rotor Online Al Melt Degasser

Rotor Online Al Melt Degasser allows nitrogen gas to enter the aluminum melt to generate discrete fine bubbles. According to the principle of partial pressure, the hydrogen dissolved in the aluminum melt is under the effect of the pressure difference. Continue to diffuse into the bubble. When the bubble rises to the liquid level, the […]

02Mar 2021
Rotors Degassing Machine

Rotors Degassing Machine is mainly used for the purification of liquid aluminum. It is the purification process of liquid aluminum alloy and the main method to improve the comprehensive performance of aluminum alloy. In the purification treatment process, the method of mixing the purification gas and the solvent and using the rotating spray of the […]

02Mar 2021
Nitrogen Degassing Unit

Nitrogen Degassing Unit is used to reduce the oxide and hydrogen in the aluminum liquid, reduce the loss of aluminum and refining agent in the slag removal process, and also reduce the oxide deposition on the furnace wall. Through automatic cycle refining timing and setting, automatic degassing and refining agent injection can be used respectively. […]