Ceramic foram filter supplier in China Alumina Ceramic Foam Filters are mainly applied for filtration of aluminum and aluminum alloys in foundries and cast houses . With their excellent resistance to attack and corrosion from molten aluminum, they can effectively remove inclusions, reduce trapped gas and provide laminar flow, and then the filtered metal is significantly cleaner. Cleaner metal results in higher-quality castings, less scrap, and fewer inclusion defects, all of which contribute to bottom-line profit. Ceramic foram filter supplier Alumina ceramic foam filter can be made by specific procedures and have peculiar bone-frame holes just like the shape of foam (Called three-dimensional connected channel) and myriad eyelets which only been found in big times microscope. AdTech use the concept of ceramic foam structure for use as a filter medium, our quality is the best like selee and pyrotek. We offer filters sized from 7” up to 26” and all common porosities between PPI 10 and 70. Ceramic foram filter supplier Our production capacity can reach to 30,000pcs per month, and now we sell 20,000pcs per month. Related posts: Alcan Corporation Ceramic foram filter supplier Ceramic Foam Filter Supplier Ceramic Foam Filtration China Ceramic Foam Filter China Ceramic Filter For Foundry China Ceramic Filter Suppliers Italy Aluminum Ceramic Filtration Casting Ceramic Filter Aluminum […]
UC Rusal visited Adtech ceramic foam filter production line In 19Auguest 2015, six technology team members from UC Rusal travelled from Moscow to Beijing, visited Adtech production base in Jiaozuo Henan Province. They are very confident about the production capacity and technology ability of Adtech. Especially they are interesting about the mass production of ceramic […]
Aluminum Casting-Why Ceramic Foam Filters? Filtration with ceramic foam filters offers several key benefits that improve the quality of premium aluminum castings. These include: * improved mechanical properties; * reduced dye-penetrant indications; * reduced x-ray evidence of nonmetallics; * reduced rework/scrap; * improved machining properties. The presence of nonmetallic inclusions is detrimental to the production […]
Ceramic Foam Filters Sizing To obtain an optimum mold fill rate, it is important to calculate the proper filter size for each specific casting application. The filter must be large enough so that it doesn’t retard or choke the flow of molten metal or become blocked with retained inclusions before the casting is completed. To […]
Aluminum Casting-Boron Nitride Coating Henze boron nitride coatings are used as highly effective release agents in the casting of light alloys. They are particularly well suited to coating refractory materials and ceramic components, such as runners, nozzles, plugs, and thermocouple protection tubes. Adtech boron nitride coatings are also successfully applied to enhance the metallic surfaces […]
Aluminum Casting-Ceramic Foam Filter Molten Metal Filtration Ceramic foam is a new industrial ceramic products with low bulk density (0.25 ~ 0.65) g/cm3, high porosity (60% ~ 90%), and three-dimensional reticulated structure. As ceramic foam has excellent properties such like: high temperature resistance, strong chemical corrosion resistance, and large surface area as a result of […]