Ceramic Foam Filters manufacture Ceramic Foam Filters manufacture AdTech are mainly applied for filtration of aluminum and aluminum alloys in foundries and cast houses. With their excellent resistance to attack and corrosion from molten aluminum, they can effectively remove inclusions, reduce trapped gas and provide laminar flow, and then the filtered metal is significantly cleaner. Cleaner […]
Foundry Foam Filter The usage of Ceramic Foam Filter (CFF) grew continuously in metal casting process, for the reason that of the value added is greater than the cost of filter application and cost for purchasing filter. Whereas 20 years ago filter were used only in emergency cases but at present filter can be considered […]
AdTech reached a strategic cooperation at the 2018 German Aluminum Industry Exhibition The latest news on October 11th, AdTech and Bahrain GMI jointly announced the formation of a deep strategic partnership, the two sides will give full play to the advantages of the grid industry, focusing on the aluminum industry filtration and purification of new […]
Ceramic Foam Filter Installation Ceramic foam Filter Installation: The filtration efficiency of Ceramic foam Filter of the aluminum plant is closely related to its proper installation and use. At the same time, it is not possible to ignore the conventional and necessary measures taken to reduce the occurrence of inclusions in the process operations such […]
Aluminum Factory Filter Plate Aluminum Factory Filter Plate Application: It is suitable for the production of high quality and high requirements aluminum sheet and foil. Through physical adsorption and chemical action, it can effectively remove various oxidation inclusions generated during aluminum smelting process, thereby reducing casting defects and improving casting quality. The next deep processing […]
Aluminum Foundry Foam Ceramic Filter Operation Aluminum Foundry Foam Ceramic Filter Uses: The AdTech Foam Ceramic Filter uses a three-dimensional network structure and an organic bubble connected to the pores as a carrier to invade the thixotropic alumina material slurry using a square calibration center. From the automatic extrusion process, the slurry is uniformly applied […]
