Foam Casting Aluminum The usage of Foam Casting Aluminum grew continuously in metal casting process, for the reason that of the value added is greater than the cost of filter application and cost for purchasing filter. Whereas 20 years ago filter were used only in emergency cases but at present filter can be considered an […]
Improve the purification effect of aluminum melt The purification technology of aluminum alloy melt furnace can be further divided into adsorption purification treatment technology and non-adsorption purification treatment technology according to the purification mechanism. The adsorption method mainly relies on the refining agent to produce the adsorption and oxidation inclusions, and at the same time […]
Ceramic Fiber Board Ceramic Fiber Board can effectively filter out non-metallic solid inclusions in aluminum and aluminum alloy melts, use foam sponges with high open-cell structure and high-purity ceramic materials to produce molded foam ceramic filter plate pores under strict quality control with high through-hole ratio It has sufficient sintering and good flexural strength to […]
Foundry Alumina Ceramic Foam Filter Foundry Alumina Ceramic Foam Filter Introduction Alumina Ceramic Foam Filter is a special technology. Divided into two shapes: round specifications, square specifications and weaving way: honeycomb. It has a foam-like porous structure of ceramic products, and its light weight, chemical stability, large surface area through-hole rate, corrosion resistance, high strength, […]
Ceramic Foam Filter Cff-A For Aluminum Casting Ceramic Foam Filter Cff-A For Aluminum Casting is mainly for the filtration of aluminum and alloys in foundries and cast houses. With the excellent resistance to attack and corrosion from molten aluminum, the filter can effectively remove inclusions, reduce trapped gas and provide laminar flow, and then the […]
Ceramic Foam Filter For Liquid Aluminum Ceramic Foam Filter For Liquid Aluminum are manufactured in several different ways. The polymeric-sponge method produces open-cell structures by impregnating a polymeric sponge with a ceramic slurry, which is then burned out to leave a porous ceramic. In order to create a honeycomb or cellular structure, a plastic-forming method […]
