Zro2 Molten Metal Filter for filtering gray and ductile iron, as a rule, are used for installation in foundry half-molds of the bottom in specially provided for this recess. Ceramic foam effectively cleans metal melts when casting into single sand molds, metal chill molds and with continuous methods of casting non-ferrous metals (for example, filtering […]
Aluminium Foam Filter for filtering the melt from cast iron, steel, bronze, brass, aluminum and other non-ferrous alloys. Filters are characterized by high thermal conductivity, durability and resistance to sudden changes in temperature, so they can be used in the filtration departments of gating systems even in the case of direct casting on the filter. […]
Foundry Filter Ceramic Foam Overview In recent years, porous ceramic filters (PCF) with porosity up to 90% and pore size of 0.5-5.0 mm are widely used abroad in foundry and steelmaking. The use of Foundry Filter Ceramic Foam increases the purity of products and reduces the amount of scrap, increases the yield of metal and […]
Ceramic Foam Filter Foundry is used in the metallurgical industry and foundry. With Ceramic Foam Filter Foundry , you can solve all the problems associated with the presence of inclusions. From the point of view of casting quality, filtering provides an increase in the mechanical and operational properties of castings. Advantages obtained using ceramic foam […]
Alumina Foam Filter The metal flow passes through a system of branched channels. Small particles that did not linger on the filter surface, as they turned out to be too small, continue to move along with the metal flow inside the network of filter channels. During filtration, the Alumina Foam Filter channels gradually overgrow, retaining […]
Poroous Foam Filter Casting of the front frame of a jet engine with a diameter of 82 cm and a mass of 40 kg is made of Al-alloy (A 201) by sand casting. In the manufacture of such castings using steel grids in the body of the castings, a significant amount of scattered slag inclusions […]
