Alumina Honeycomb Filter Aluminum alloy is widely used in industry for its good mechanical properties (high specific strength, specific stiffness) and good casting properties. It is an important structural material for automobiles, shipbuilding, aerospace and other manufacturing industries. Especially in the aviation industry, the application is more and more extensive, and the quality requirements for […]
Zirconia Porous Ceramic Filter The demand for Zirconia Porous Ceramic Filter will further increase as the aluminum industry continues to grow. Improving the production process of Zirconia Porous Ceramic Filter and improving product performance have become the key for companies to compete for the market. Sizing is an important process in the production process of […]
Why does White Ceramic Foam Filter turn black when baked? To deal with the fumes generated by the firing of foam ceramics, it is first necessary to understand the composition of the polyurethane sponge used in the foam ceramics, and then analyze the smoke components and the amount of smoke generated during the combustion process. […]
Foundry Casting Filtration Foundry Casting Filtration should pay attention to several issues. The advantages of the foam ceramic filtration technology are that it is simple and easy to remove small and suspended slag inclusions and inclusions in the aluminum melt, thereby improving the quality of the ingot and has been widely used in many countries. […]
Ceramic Foam Filter Factory The Ceramic Foam Filter Factory can be quickly fired in the range of 1350 ° C to 1460 ° C, and the firing rate is higher than 95%. Product performance and physical and chemical indicators are in line with production and use requirements. The Ceramic Foam Filter Factory removes inclusions from […]
Alumina Reticulated Foam Filter The influence of the sintering phase transformation process, sintering properties and mechanical properties of Alumina Reticulated Foam Filter. The organic precursor impregnation method is suitable for preparing articles with high porosity and interpenetrating pores, and the process is simple and the cost is low. The choice of precursors during the preparation […]
