Italy Aluminum Ceramic Filtration is a three-dimensional connected network structure with high porosity, large slag collecting surface area, large filtering internal surface area, small flow resistance, and good filtering effect. Ceramic foam filter Dimention 660x660x50(26″) 584x584x50(23″) 508x508x50(20″) 432x432x50(17″) 381x381x50(15″) 305x305x50(12″) 228x228x50(9″) 178x178x50(7″) Ceramic foam fitler Pore Size (PPI): 10/20/30/40/50/60 Italy Aluminum Ceramic Filtration is mainly […]
Aluminium Alloy Foundry Filter is used to filter non-metallic solid inclusions in aluminum and aluminum alloy solutions. It is cost-effective. It uses high-open-pore structure sponge and high-purity ceramic materials. After strict quality control, the pore size is large, the through-hole rate is high, the sintering is sufficient, the flexural and compressive strength is good, and […]
Aluminium Alloy Ceramic Foam Filters For Casting has the characteristics of high temperature resistance, corrosion resistance, molten metal erosion resistance, high strength, high qualification rate, and large surface area. It is mainly used in the filtration and purification of metallurgy and casting metal liquids. The molten metal mixture flows through the porous structure of the […]
Ceramic Foam Filter is mainly used for the filtration and purification of aluminum and alloy liquid in foundries with excellent resistance to corrosion and corrosion of aluminum liquid. It can effectively remove inclusions, reduce trapped gas, provide laminar flow, and the filtered metal is significantly cleaner. Cleaner metals result in higher quality castings, less scrap […]
Ceramic Filter Cff is widely used in the production of large aluminum processing enterprises in Russia, the Middle East and Southeast Asia. During use, it is not only necessary to remove the aluminum melt inclusions, but also to avoid the blockage of the Ceramic Filter Cff and improve the service life of the CFF. The […]
Porous Ceramic Filter Factory meets high quality standards and has excellent homogeneity. They have a variety of pore sizes and can be used for ceramic filters of all common metals such as iron, stainless steel and aluminum. As an excellent Porous Ceramic Filter Factory, we have a deep understanding of customer needs and industrial requirements. […]
Sell Alumina Ceramic Foam Filter to all aluminum melting and casting processing industries, such as strip processing plants, foil processing plants, tubular bar processing plants and recycled aluminum ingot plants. The quality of aluminum melt is very important, and has a great influence on its subsequent processing performance and the quality of the final product. […]
Sell Ceramic Foundry Filter which can improve the quality of finished products (foil, block, ingot, rod, profile, etc.) and meet the requirements of high purity cast metal. It reduces the scrap rate of the final product and improves the quality. The filter usually uses a standard size in inches with a porosity of 10-60ppi (holes […]
Sell Foundry Filter adopts a three-dimensional mesh structure, connects the pores of organic foam as the carrier, and penetrates into the thixotropic alumina paste. The four-square compensation intermediate spacing automatic extrusion technology is adopted. The paste is evenly coated on the foam skeleton of the carrier at 1180°C Installed on the filter tank, used for […]
Rus Aluminium requires that the selection of ceramic foam filters should be based on the quality requirements of the casting and the number of inclusions in the molten metal to determine the pore size of the filter. The size of the filter is determined according to the pouring speed and pouring weight. Rus Aluminium said […]