Tag Archives: Ceramic Foam Filter Molten Aluminium Filtration

Sell ​​Ceramic Foundry Filter which can improve the quality of finished products (foil, block, ingot, rod, profile, etc.) and meet the requirements of high purity cast metal. It reduces the scrap rate of the final product and improves the quality. The filter usually uses a standard size in inches with a porosity of 10-60ppi (holes […]

Sell ​​Foundry Filter adopts a three-dimensional mesh structure, connects the pores of organic foam as the carrier, and penetrates into the thixotropic alumina paste. The four-square compensation intermediate spacing automatic extrusion technology is adopted. The paste is evenly coated on the foam skeleton of the carrier at 1180°C Installed on the filter tank, used for […]

Rus Aluminium requires that the selection of ceramic foam filters should be based on the quality requirements of the casting and the number of inclusions in the molten metal to determine the pore size of the filter. The size of the filter is determined according to the pouring speed and pouring weight. Rus Aluminium said […]

Ceramic Foam Filter Manufacturing Process in several different ways. The polymeric-sponge method produces open-cell structures by impregnating a polymeric sponge with a ceramic slurry, which is then burned out to leave a porous ceramic. In order to create a honeycomb or cellular structure, a plastic-forming method called extrusion is used, where a mixture of ceramic […]