Tag Archives: ceramic foam filter aluminium

Casting Filter Factory is constantly pursuing the best technology available on the market to produce the best quality aluminum ingots, aluminum round bars or aluminum strips for its customers. Our guarantee will not stop at customers, but will continue to provide customers with quality products! Our Casting Filter can ensure the production of high-quality cast […]

Zirconia Filter Factory produces a new type of industrial ceramic products for aluminum melting and casting purification. It has a low bulk density (0.25-0.65) g/cm3, high porosity (60%-90%) and a three-dimensional network structure. Due to its excellent properties such as high temperature resistance, chemical corrosion resistance, and large porosity, foam ceramics are widely used in […]

Sell ​​Foundry Filter adopts a three-dimensional mesh structure, connects the pores of organic foam as the carrier, and penetrates into the thixotropic alumina paste. The four-square compensation intermediate spacing automatic extrusion technology is adopted. The paste is evenly coated on the foam skeleton of the carrier at 1180°C Installed on the filter tank, used for […]

Rus Aluminium requires that the selection of ceramic foam filters should be based on the quality requirements of the casting and the number of inclusions in the molten metal to determine the pore size of the filter. The size of the filter is determined according to the pouring speed and pouring weight. Rus Aluminium said […]

Ceramic Foam Filter Aluminium is used to filter aluminum slag into aluminum melt to improve the purity of the melt. 1. It can effectively eliminate large inclusions in the aluminum liquid. 2. It can remove the fine inclusions of a few microns in size in the aluminum melt that conventional processes cannot do. At the […]

Ceramic Foam Filter Ceramic Foam Filter is produced basing on carrier with solid reticular structure and combined organic foam pores. The producing procedure is as below, put carrier into the thixotropic alumina slurry, adopt square to center correcting automatic extrusion process, so that slurry evenly deposits in foam skeleton of carrier. After drying solidification, then […]

Ceramic Foam Filter Manufacturing Process in several different ways. The polymeric-sponge method produces open-cell structures by impregnating a polymeric sponge with a ceramic slurry, which is then burned out to leave a porous ceramic. In order to create a honeycomb or cellular structure, a plastic-forming method called extrusion is used, where a mixture of ceramic […]