Tag Archives: Ceramic Filtration

Ceramic Foam Filter is mainly used for the filtration and purification of aluminum and alloy liquid in foundries with excellent resistance to corrosion and corrosion of aluminum liquid. It can effectively remove inclusions, reduce trapped gas, provide laminar flow, and the filtered metal is significantly cleaner. Cleaner metals result in higher quality castings, less scrap […]

Ceramic Filter Cff is widely used in the production of large aluminum processing enterprises in Russia, the Middle East and Southeast Asia. During use, it is not only necessary to remove the aluminum melt inclusions, but also to avoid the blockage of the Ceramic Filter Cff and improve the service life of the CFF. The […]

Porous Ceramic Filter Factory meets high quality standards and has excellent homogeneity. They have a variety of pore sizes and can be used for ceramic filters of all common metals such as iron, stainless steel and aluminum. As an excellent Porous Ceramic Filter Factory, we have a deep understanding of customer needs and industrial requirements. […]

Sell ​​Alumina Ceramic Foam Filter to all aluminum melting and casting processing industries, such as strip processing plants, foil processing plants, tubular bar processing plants and recycled aluminum ingot plants. The quality of aluminum melt is very important, and has a great influence on its subsequent processing performance and the quality of the final product. […]

Foundry Filter Factory produces aluminum water foam ceramic filter plates, which use a three-dimensional network structure and organic bubbles connected to the holes as a carrier to penetrate thixotropic alumina slurry. The slurry was uniformly applied to the foam skeleton of the carrier, and baked and cured at a high temperature of 1180°C. Product advantages […]

Casting Filter Factory is constantly pursuing the best technology available on the market to produce the best quality aluminum ingots, aluminum round bars or aluminum strips for its customers. Our guarantee will not stop at customers, but will continue to provide customers with quality products! Our Casting Filter can ensure the production of high-quality cast […]

Zirconia Filter Factory produces a new type of industrial ceramic products for aluminum melting and casting purification. It has a low bulk density (0.25-0.65) g/cm3, high porosity (60%-90%) and a three-dimensional network structure. Due to its excellent properties such as high temperature resistance, chemical corrosion resistance, and large porosity, foam ceramics are widely used in […]

Sell ​​Ceramic Foundry Filter which can improve the quality of finished products (foil, block, ingot, rod, profile, etc.) and meet the requirements of high purity cast metal. It reduces the scrap rate of the final product and improves the quality. The filter usually uses a standard size in inches with a porosity of 10-60ppi (holes […]

Sell ​​Foundry Filter adopts a three-dimensional mesh structure, connects the pores of organic foam as the carrier, and penetrates into the thixotropic alumina paste. The four-square compensation intermediate spacing automatic extrusion technology is adopted. The paste is evenly coated on the foam skeleton of the carrier at 1180°C Installed on the filter tank, used for […]

Rus Aluminium requires that the selection of ceramic foam filters should be based on the quality requirements of the casting and the number of inclusions in the molten metal to determine the pore size of the filter. The size of the filter is determined according to the pouring speed and pouring weight. Rus Aluminium said […]